Turf Care Equipment For Sale From Pioneer Equipment Inc.

Montana 750R Post Driver, comes with standard 7in Domed Tool and Nitrogen Bottle with Charge Kit. 500-900 Blows per minute. In stock and ready. Skid Steer Quick attach but will work on tractors wi...

Vail Disc Mulcher, XDI-7900-BVS, 79-inch Disc Width, 2800 LBS. 35-40GPM, FD Drive, Steel Beaver Teeth, Vail Severe Duty Motor With 5-inch diameter Shaft, Fell Tress up to 20 inch Diameter.

VAIL TREE SAW, XSS2-3015-FG, STANDARD FLOW, HEAVY DUTY UNIT, AGED UNIT, CARRY OVER NEW, NEVER. SAVE THOUSANDS.

VIRNIG TREE PULLER, HEAVY DUTY, WITH REPLACEABLE CUTTING EDGES, 1 INCH THICK AR400 JAWS WITH REPLACEABLE SERIES 23 TEETH FOR AGRESSIVE DIGGING..

WALLENSTEIN 3 POINT PTO DRIVE STUMP GRINDER, DOES NOT REQUIRE REMOTE HYDRAULICS ONLY REQUIRES HYDROSTATIC DRIVE TRANSMISSION.

Baumalight Skid Steer Mount Tree Saw. 180 degree Manual Rotation, 30inch Blade AR400 Steel, 15 Teeth with 3 Edges Per Tooth, 3/4 inch Cut Thickness, High Performance Motor.

Baumalight MP560, 60 in cut width. Cat II 3pt PTO Driven Mulcher will cut material 1.5in above ground to 1in below grade 45 to 65 PTO HP. Tractor required. Back door hydraulically controlled for be...

Baumalight Mulcher Heavy Duty 60inch High Flow, Requires large skid steer with high flow. DEMO MODEL SHOWN.

BUSH HOG BH115, 5FT ROTARY CUTTER WITH SLIP CLUTCH CAT 3 DRIVELING AND FRONT SAGFETY CHAIN. RATED 1 INCH DIAMETER CUTTING CAPACITY WITH A 60HP GEAR BOX.

Bush Hog Grading Scraper. 7 foot 3 point with scarifiers. Cat 1 or 2.

Cammond Heavy Duty 7 ft Commercial Box Blade. Floating Tailboard. Cat I or II, Best built in the industry.

Cammond Grading Scraper, 7 FT. Skid Steer Mount, Fixed Blade Design, Heavy Duty, with Replaceable Skids, Replaceable Cutting Edges,

Dig, Pull, Handle, Trees, Post, and more. The absolute best land clearing attachment for a Skid Steer or Tractor Front End Loader.

Danuser MEGAMIXER. Will Mix, or Dispense feed, rock, sand, concrete, or just about any flowable material. has universal quick attach and can be used either right or left.

DOMOR 84 INCH GRADING SCRAPER FOR SKID STEER LOADER. BUILT FOR COMMERCIAL HEAVY DUTY DIRT CONSTRUCTION. DESIGNED TO CUT AND GRADE IN BOTH DIRECTIONS WITH THE FOUR BLADE DESIGN.

DOMOR 72INCH HEAVY DUTY GRADER. THIS IS THE ULTIMATE GRADING TOOL FOR A SKID STEER. HAS FOUR BLADE DESIGN FOR CUTTING AND GRADING IN BOTH DIRECTIONS.

DoMor, 6ft MANUAL ADJUST GRADING SCRAPER, PUSH OR PULL CUTTING ACTION, GRADE FLAT WITH BLADES SET STRAIGHT OR GRADE ROADS WITH ADJUSTABLE ANGLE OF BLADES. HEAVY DUTY.

DOMOR 84 INCH MANUALLY ADJUSTABLE GRADER BLADE FOR SKID STEERS, HEAVY DUTY FOUR BLADE DESIGN BUILT FOR CUTTING AND GRADING IN BOTH DIRECTIONS. THIS IS THE BEST GRADING TOOL ON THE MARKET FOR GRADIN...

DOMOR FINISH GRADER, 6FT SKID STEER MOUNT, PUSH PULL DESIGN, BEST FINISH GRADER ON THE MARKET.

LOFLIN HEAVY DUTY BRUSH GRAPPLES, AVAILABLE IN 72,78,84 INCH. SKID STEER MOUNT AND SOME JOHN DEERE MOUNTS AVAILABLE. DUAL CLAW DESIGN TO ALLOW FOR BETTER CLAMPING ON IRREGULAR SHAPED LOADS. 1/2 I...

M&M HC16 TREE SHEAR, SKID STEER MOUNT, THIS IS THE ULTIMATE SHEAR WITH CAPACITY OF 16 INCH IN ONE CUT. 48 INCH GUARD.

Montana Post Driver, will drive up to 8inch diameter post, has 400 to 8900 strikes per minute, comes standard with Domed Tool, Flat Tool, Rock Spike and Concrete Breaker Point, includes Nitrogen Ch...

Montana T-REX 350E Post Driver, Center mount on Skid Steer Plate. Will drive up to 4 inch pipe, 700 to 1200 strikes per min. Very impressive driver for t-post and small pipe.

VAIL BRUSH CUTTER, XBCC2-7715-MB, DEMO UNIT, VERY LITTLE USE, STANDARD FLOW 15 TO 25 GPM, 4 BLADE ON BOTTOM OF FLYWHEEL AND 4 BLADES FOR CUTTING. VERY HEAVY DUTY 10 INCH CAPACITY, 700 LB 1-INCH-TH...

Vail XBC2-7720-MB, Brush Cutter, 77 Inch, High Flow, 25to 45 GPM, 10 Inch Capacity, 700LB. 1 Inch Thick Flywheel, 4 Mulching Blades on Bottom of Flywheel for fine mulching down to ground level, 4- ...

VAIL DRUM MULCHER, HIGH FLOW WITH BRAKE, PLANER TEETHE 4 SIDED, REPLACEABLE INNER LINERS AND SKIDS, HOSE MANAGEMENT SYSTEM, SYSTEM CASE DRAIN WITH 4INCH PRESURE GUAGES, 25 TO 50 GPM, TUNEABLE TO SP...

VAIL HIGH FLOW TREE SAW, 180 DEGREE ROTATION, GREENTEETH. IN STOCK READY TO GO

VIRNIG ROTARY BRUSH CUTTER, HEAVY DUTY 8 INCH CAPACITY, HIGH FLOW, HAS OPTIONAL MULCHING TEETH ON BOTTOM OF DISC FOR GRINDING DOWN STUMPS. 84IN CUT.