2023 DENIS CIMAF DAF150D

Mulcher

2023

N/A

New

The DAF is an industrial high-power forestry brushcutting-mulching system that can be installed on most compact loaders or other dedicated forestry carriers. DAF brushcutters and mulchers are designed for vegetation control work. Motor - Variable displacement, axial-piston motors that minimize overheating and improve re-acceleration. Drive - Industrial cogged belt drive system that prevents slippage and reduces effort applied to bearings compared with V-belts, for longer bearing life. Rings - Protective rings that limit the size of the bites and considerably reduce risks of breakage on the knife holders. Knives - Heat-treated, bolt-on forged knives that deliver maximum resistance to impact and abrasion, and that can be sharpened right on the unit. Easy replacement - Easy-to-replace knives: A single nut and bolt holds the knife in place. Replacing worn knives is a very easy. Replaceable Liner - With the high speeds and forces involved in industrial mulching, even the hardest steel frame is subject to wear and tear. This easy-to-replace, bolt-in wear liner extends the lifetime of the unit by protecting the frame. Hydraulic pushbar option - Especially useful when working in older growth as a secure way to direct where big trees will fall when cutting them down SPECIFICATIONS: Approximate Min. Carrier Power [kW (hp)]: 60(75) Cutting Width [cm (in)]: 150 (59) Cutting Distance from Ground Level [cm (in)]: 1 (0.4) Number of Blades on Rotor: 21 Optimal Target Material Diameter [cm (in)]: 15 (6) Exterior Width [cm (in)]: 182 (72) Exterior Height (with Pushbar) [cm (in)]: 150 (59) Exterior Width (with Pushbar) [cm (in)]: 122 (48) Exterior Height (without Pushbar) [cm (in)]: 66 (26) Exterior Width (without Pushbar) [cm (in)]: 72 (29) Rotor Diameter [cm (in)]: 46 (18) Approximate Typical Weight [kg (lbs)]: 1050 (2300) HYDRAULIC SYSTEM: Variable Displacement Axial Piston Motor [cc]: 1x 85 Required Continuous Flow [L/min (gal/min)]: 87 (23) Max. Operating Pressure [bar (psi)]: 240 (3500) Rotating Speed [rpm]: 2500 Pressure Line I.D. [# (in)]: #12 (0.75) Return Line I.D. [# (in)]: #12 (0.75) Drain Line I.D. [# (in)]: #8 (0.5) OPTIONS: Standard Sharpenable Bolt-on Forged Blades Hydraulic Pushbar Bolt-on wear liner Specifications Manufacturer DENIS CIMAF Model DAF150D Condition New