2012 CATERPILLAR 289C2

2012

2,887

CAT0289CTJMP02980

Used

Machine Highlights Year: 2012 Make: CAT Model: 289c Cab Standard flow Joystick Controls Teeth bucket AC/Heat 2 speed 82 HP Operating Weight: 10365lba Hours: 2887 SN: CAT0289CTJMP02980 Engine Number of cylinders : 4 Engine make : Caterpillar Engine model : Cat C3.4 DIT / C3.4T Gross power : 84 hp Net power : 82 hp Rated engine speed : 2,500 rpm Displacement : 201 cu in Bore : 3.7 in Stroke : 4.7 in Aspiration : Turbocharged Gross power—SAE J1995 : 84 hp Net power—SAE J1349 : 82 hp Dimensions Width over tracks : 6.5 ft (78 in) Height to top of cab : 6.95 ft Ground clearance : 9.1 in Clearance at maximum lift and dump : 8.06 ft (96.7 in) Reach at maximum lift and dump : 2.57 ft (30.7 in) Length of track on ground : 69.6 in (5.8 ft) Length with bucket on ground : 144.81 in Length without bucket : 116.5 in (9.72 ft) Length with bucket : 12.08 ft Bucket pin height at maximum lift : 10.63 ft Bucket pin reach at maximum lift : 14.6 in Bucket pin height at carry position : 7.7 in Departure angle : 44 degrees Maximum dump angle : 50 degrees Maximum overall height : 160.7 in Maximum reach with arms parallel : 50.5 in Overall track length : 89.4 in Rack-back angle at maximum height : 85 degrees Turning radius from center to bucket : 91.1 in Turning radius from center to coupler : 57.9 in Turning radius from center to rear : 64.6 in Undercarriage Ground contact area : 2,504 sq in Ground pressure : 4.1 psi Operational Specifications Operating weight : 10,365 lb Rated operating capacity at 50% tipping load : 3,850 lb Rated operating capacity at 35% tipping load : 2,695 lb Rated operating capacity with optional counterweight : 4,101 lb Tipping load : 7,721 lb Breakout force—tilt cylinder : 7,308 lb Operating voltage : 12 V Alternator output : 90 amps Maximum speed—low range : 5.1 mph Maximum speed—high range : 8.5 mph Powertrain Forward travel speed—standard : 5 mph Reverse travel speed—standard : 5 mph Forward travel speed—two-speed : 8.5 mph Reverse travel speed—two-speed : 8.5 mph Loader Breakout force : 7,308 lb Rated operating load : 3,850 lb Bucket capacity : 0.6 cu yd Tipping load : 7,721 lb Hydraulic System Standard hydraulic flow : 22 gal/min Standard hydraulic pressure : 3,335 psi High-flow XPS maximum flow : 33 gal/min High-flow XPS maximum pressure : 4,061 psi Hydraulic power : 42.8 hp Hydraulic system capacity : 15 gal Hydraulic tank capacity : 11 gal Service Refill Capacities Fuel capacity : 26 gal Cooling system capacity : 3.7 gal Engine crankcase capacity : 2.6 gal Hydraulic tank capacity : 11 gal Hydraulic system capacity : 15 gal Cab and Safety ROPS standard : SAE J1040 MAY94 / ISO 3471:1994 FOPS standard : SAE J1043 SEPT87 / ISO 3449:1992 Level I FOPS Level II standard : SAE J231 JAN81 / ISO 3449:1992 Level II 2012 CATERPILLAR STANDARD FLOW CAB LOADER SKID STEER WITH JOYSTICK CONTROLS, TEETH BUCKET, AC/HEAT, 2 SPEED WITH AN OPERATING WEIGHT OF 10365LBS. SE HABLA ESPAÑOL! FINANCING AVAILABLE PLEASE CALL US WITH ANY QUESTIONS! ASK ABOUT OUR REASONABLE SHIPPING RATES!

Yes

25.9 gal

3,850 lb

10,365 lb

7,721 lb

7,308 lb

22 gpm

Enclosed

Yes

Yes

9.1 in

116.5 in

144.81 in

82 HP

CAT