Machine Highlights
Year: 2024
Make: Caterpillar
Model: 265
OROPS
Standard Flow
Joystick Controls
2 Speed
Hours: 615
SN: CAT00265EKR403919
Warranty
Caterpillar 2 year warranty until 12/21/2026 or 2,000 hours
Emissions warranty until 12/31/2029 or 3,000 hours
EXTENDED WARRANTY AVAILABLE FOR PURCHASE
Ask one of our salesmen for more information!
Engine
Gross Power - SAE J1995:2014: 74hp
Engine Model: Cat® C2.8TA (turbo after-cooled)
Net Power - ISO 9249: 73hp
Net Power - SAE 1349: 74 hp
Peak Torque at 1,360 rpm SAE J1995 : 280 lb/ft
Displacement: 171 in²
Stroke: 4.3in
Bore: 3.5in
Operating Specifications
Rated Operating Capacities - 35% Tipping Load: 2823lb
Rated Operating Capacities - 50% Tipping Load: 4033lb
Rated Operating Capacity with Optional Counterweight - 35% Tipping Load : 1343kg
Tipping Load: 8066lb
Breakout Force - Lift Cylinder: 6739lb
Breakout Force - Tilt Cylinder: 8680 lb
Ground Contact Area - With 450 mm/17.7 in Track : 2512 in²
Ground Pressure - With 450 mm/17.7 in Track: 4.2psi
Weights
Operating Weight: 10492lb
Dimensions
Bucket Pin Height - Carry Position: 8.4in
Bucket Pin Height - Maximum Lift : 132in
Bucket Pin Reach - Maximum Lift: 9.8in
Clearance at Maximum Lift and Dump: 104.5in
Departure Angle: 28.2°
Ground Clearance: 8.5 in
Height - Top of Cab: 83.3in
Length - Track on Ground : 64in
Length - With Bucket on Ground : 140.9in
Length - Without Bucket: 116.1in
Maximum Overall Height: 164.3in
Maximum Reach - With Arms Parallel to Ground: 46.7in
Overall Length - Track: 83.7in
Rack Back Angle - Maximum Height: 85.3°
Reach at Maximum Lift/Dump : 25.1 in
Roll Back Angle: 27°
Turning Radius from Center - Bucket (racked): 87.8 in
Turning Radius from Center - Coupler : 56.5 in
Turning Radius from Center - Machine Rear : 68.5 in
Vehicle Width (450 mm/17.7 in tracks) : 75.8 in
Maximum Dump Angle: 46.4°
Service Refill Capacities
Cooling System: 2.8gal
Engine Crankcase : 2.1gal
Fuel Tank : 31.9gal
Hydraulic System : 9.7gal
Hydraulic Tank : 6.9gal
Power Train
Travel Speed - Forward or Reverse - One Speed : 5mph
Travel Speed - Forward or Reverse - Two Speed : 8.1mph
Hydraulic System
Hydraulic Flow: 23 GPM
Hydraulic Pressure: 3,500 psi
2024 CATERPILLAR 265 OROPS STANDARD FLOW SKID STEER WITH JOYSTICK CONTROLS AND 2 SPEEDS! CATERPILLAR 2 YEAR WARRANTY UNTIL 12/21/2026 OR 2,000 HOURS. EMISSIONS WARRANTY UNTIL 12/31/2029 OR 3,000 HOURS. EXTENDED WARRANTY AVAILABLE FOR PURCHASE. ASK ONE OF OUR SALESMEN FOR MORE INFORMATION!
SE HABLA ESPAÑOL!
FINANCING AVAILABLE
PLEASE CALL US WITH ANY QUESTIONS!
ASK ABOUT OUR REASONABLE SHIPPING RATES!
*Monthly payment stated above assumes a secured commercial use loan transaction available for highly qualified commercial loan applicants. Actual loan payment amount and terms may vary. Consumer financing not available for consumers residing in Nevada. Additional state restrictions may apply. Equal opportunity lender. Click here for more state licenses and disclosures. NMLS ID: 1857954. VERMONT RESIDENTS: THIS IS A LOAN SOLICITATION ONLY. CurrencyFinance IS NOT THE LENDER. INFORMATION RECEIVED WILL BE SHARED WITH ONE OR MORE THIRD PARTIES IN CONNECTION WITH YOUR LOAN INQUIRY. THE LENDER MAY NOT BE SUBJECT TO ALL VERMONT LENDING LAWS. THE LENDER MAY BE SUBJECT TO FEDERAL LENDING LAWS. CALIFORNIA RESIDENTS: Financing provided or arranged by Express Tech-Financing, LLC dba Currency pursuant to California Finance Lender License #60DBO54873
Your current browser cannot run our content, please make sure your browser is fully updated or try one of the browsers below.