Description
Tight spaces? No problem! Big excavator energy in a mid-sized package, perfect for your jobsite!!
Engine:
Model: Komatsu SAA3D95E-1
Type: water-cooled, 4-cycle, direct injection
Cylinders: 3
Bore x stroke: 3.74 in. x 4.52 in.
Piston displacement: 149.5 cu. in.
Aspiration: turbocharged, aftercooled, cooled EGR
Horsepower (SAE J1995 gross): 68 hp @ 1,900 rpm
Horsepower (net, ISO 9249/SAE J1349): 67.9 hp
Rated rpm: 1,850–1,900 rpm
Emissions: EPA Tier 4 Final (catalytic system, no DPF required)
Fan drive: mechanical, with viscous fan clutch
Weight:
Operating weight: 18,739 – 19,224 lbs. (depending on configuration)
Performance/Digging"
Max digging depth: 15 ft.
Max horizontal reach: 24 ft.
Bucket digging force: 13,781 lbf (ISO) / 11,982 lbf (SAE)
Arm digging force: 8,161 lbf (ISO) / 7,711 lbf (SAE)
Arm tearout force: 8,160 lbf (ISO) / 7,710 lbf (SAE)
Drawbar pull: 15,309 lbf
Bucket/Attachments:
Bucket capacity: 0.12 – 0.26 cu. yd.
Boom: one-piece, 11 ft. 2 in.
Arm: 6 ft. 11 in. (with provision for hydraulic thumb)
Auxiliary hydraulics: two-way, 36.5 gpm relief, standard high-flow with proportional joysticks, in-cab programmable flow rates
Hydraulics:
System: Komatsu HydrauMind (closed-center, load-sensing, pressure-compensated)
Max pump flow: 42.2 gpm (boom/arm/bucket/travel) / 17 gpm (swing/blade)
Hydraulic tank capacity: 14.8 gal.
Travel/Drive:
Drive: hydrostatic
Travel speed: 1.9 mph (low) / 3.1 mph (high)
Ground pressure: 5.54 PSI (road liner/triple grouser) / 4.26 PSI (triple grouser) / 5.41 PSI (rubber track)
Track width: 18 in.
Track rollers: 5 each side / Carrier rollers: 1 each side
Track adjuster: hydraulic
Brakes:
Service: hydraulic lock
Parking: mechanical discs
Blade:
Standard grading blade: 7 ft. 7 in., new moldboard profile
Fluid Capacities:
Fuel tank: 33 gal.
Radiator: 4.8 gal.
Engine oil: 2.7 gal.
Final drive (each side): 0.29 gal.
Swing drive: 0.74 gal.
Cab/Features:
Climate-controlled cab, air suspension seat
Bluetooth radio with USB
High-resolution monitor with rearview camera
Sliding cab door, LED lighting
Six selectable working modes
Automatic load-sensing two-speed travel
Noise level: 71 dBA
Other:
Class: 9-ton compact midi-excavator, short tail swing
Designed for underground utility, bridge, and urban construction workSpecifications
Year2026
ManufacturerKOMATSU
ModelPC88MR-11
Hours51
Serial Number10093
ConditionNew
Stock Number10093
Operating Weight19,200 lb
Auxiliary HydraulicsYes
Track TypeRubber
ROPSEnclosed
Year2026|
ManufacturerKOMATSU|
ModelPC88MR-11|
Hours51|
Serial Number10093|
ConditionNew|
Stock Number10093|
Operating Weight19,200 lb|
Auxiliary HydraulicsYes|
Track TypeRubber|
ROPSEnclosed|
